Well Care FAQ

  • Depending on the source, you may need a professional cleaning, chlorination flush, or targeted filtration adjustment. We’ll guide you step-by-step or connect you directly to qualified professionals for a deeper dive.

  • Regular cleaning, maintaining system flow (especially for seasonal homes), and ensuring your softener or heater is maintained correctly all support microbial balance.

  • Clarity doesn’t equal health. Biofilms and microbial shifts develop long before visible issues appear. Elowelle helps you catch them early, when maintenance is affordable and straightforward.

  • Shocking a water well involves disinfecting it with chlorine bleach. Flush and retest before drinking your well water.

  • Wait 12–24 hours until the chlorine odor from bleaching disappears, then flush and retest before using your well water.

  • Adding chlorine disinfects your well after contamination or flooding. Chlorinating your well is a service best handled by professionals, and we recommend you find a nearby contractor if you need to chlorinate your well water.

  • Pump replacement usually requires professional servicing, as the pumps are typically complex and heavy.

  • Check your well for water pressure, flow, and motor performance to see if it’s working correctly. We recommend finding a local professional for this purpose.

  • Common signs that a well water pump needs servicing or replacement include low water pressure, sputtering faucets, or no water flow.

  • Adjust your water pressure settings, clean the plumbing connected to your well, or consider upgrading equipment, such as your filters or water pump.

  • Inspect your well’s water pump, tank, and plumbing. An overgrown biofilm can also cause water pressure issues if it’s clogging the pipes.

  • Iron filters, water softeners, or aeration systems may be used to remove iron from your well water. Consult a professional if you need this service.

  • Shock chlorination may help temporarily to rid your well water of problematic iron bacteria, but filtration is often needed.

  • Reverse osmosis and ion exchange are common methods of removing nitrates from well water. Consult a professional if you need this service.

  • Treatment depends on the measured level of nitrates in your water. RO and ion-based filtration systems are often recommended as a solution.

  • If you notice that your well water smells a bit like rotten eggs, new filters and aeration systems could help fix any hydrogen sulfide odors.

  • If you notice that your well water is brown, the culprits could be iron, manganese, or sediment in your well. In any case, this would be an alarming finding. We highly recommend that you immediately test your water using Elowelle’s water kit and hold off on using or consuming your well water until the problem is resolved.

  • The ‘right’ answer is ‘it depends,’ which is why we offer our Elowelle testing kit at such an affordable price point. Generally speaking, sediment, flooding, or microbial shifts can cause dirty water.

  • If your well water tastes a bit off or just doesn’t taste the way you’d like, the only way to identify the cause is via testing. Depending on the results of your water test, we recommend contacting a local professional to remedy the situation.

  • The very first step is to conduct a test of your well water using Elowelle’s test kit. Then follow a treatment plan based on your well’s unique biostability score and the next step recommendations in your water analysis report. description

  • Shock chlorination may work short-term to treat coliform bacteria, but a long-term solution will depend on your well’s unique composition. It may involve further testing, filtration, and even sealing.